2030 Broadway St. Pekin, IL 61554 M-Th 10 - 5:30 FRI 10 - 5 SAT 9:30 - 3 SUN Closed EVENINGS By Appointment SCHEDULE POOL CLOSING
(309) 692-0292

Pool Start-Up

New Fill Start-Up

Spring Start-Up

New Pool or Fresh Water Start-Up
1. Pour (1) bottle of REVIVE into pool as it fills.
See directions on back of bottle. Dose = 1 Qt. per 24,000 gallons. (You’re better off adding the entire bottle.)
2. After 48 hrs, bring a water sample to San Juan Pools & Spas for testing. Spring Start-Up With Clear Water
1. Add 1 bag per 10,000 gallons bag(s) of BOOSTER.
2. Spray 1 Qt. per 24,000 gallons bottle(s) of REVIVE over the surface of the pool.
3. Check filter for pressure increase and clean or backwash as necessary.
Spring Start-Up With Slightly Cloudy, Green Water
(can still see the bottom of the pool)
1. Vacuum and Brush the pool walls and floor thoroughly.
2. Add 2 bags per 10,000 gallons bag(s) of BOOSTER.
3. Run the pump & filter overnight.
4. Turn off the pump & filter overnight.
5. Spray 1 Qt. per 24,000 gallons bottle(s) of REVIVE over the surface of the pool.
6. Leave pump & filter off for up to 48 hours or until everything settles to the bottom of the pool.
7. Vacuum pool to waste if possible. Clean cartridge filters frequently.
8. Bring a water sample to San Juan Pools & Spas for testing.
Green/Black or Neglected Pools. (Ask for a 10 + 2 + 2 Sheet)
1. Vacuum and Brush the pool walls and floor thoroughly.
2. Add 10 bags per 15,000 gallons bag(s) of SUN BURN FORCE.
3. Run the pump & filter overnight.
4. Turn off the pump & filter overnight.
5. Spray 2 Qts. per 15,000 gallons bottle(s) of REVIVE over the surface of the pool. (Go ahead and add it all.)
6. Leave pump & filter off for up to 48 hours or until everything settles to the bottom of the pool.
7. Vacuum pool to waste if possible. Clean cartridge filters frequently.
8. Bring a water sample to San Juan Pools & Spas for testing.

Call with Questions. 309-346-1420